Lazy Susan cabinet has a platform that rotates to allow access to items on the back of the platform. Generally, this is a special corner of the cabinet that is installed along with the rest of the cabinets. If you have a corner cabinet with fixed shelves, you may want to know “How to install a lazy susan in an existing corner cabinet?” Many manufacturers offer full and crescent lazy susan kits, which are easy to install.
How to install a lazy susan in an existing corner cabinet?
- Choose a Lazy Susan shelving system to fit your existing cabinets. Kits are made for square corner cabinets that have a long and deep cabinet, as the only dead space access and systems are also available for corner angle cabinets with fixed shelves.
- Remove all items from the closet. Insert the Lazy Susan shelf unit above the shelf or half the height of the closet if there is no shelf. Press the mounting location for the inside of the cabinet wall. Flip the shelf out to see how it integrates and operates. If it works correctly, in that place, mark the installation holes.
- Retract the shelf into the closet and draw an outline around the outside of the curved side on any existing shelf. You’re going to want to cut out the extra storage shelf that offers beyond the curve and storage system, saving that part of your shelf for rarely used. Eliminate the shelving system from the closet.
- Press the blade of a router tip falls into the wood 1/4 inch outside of its outline. Some shelves can be removed with a jigsaw. Follow the outline cut the shelf. Using a hammer and crowbar to remove a shelf that is being replaced with the Lazy Susan.
- Place the Lazy Susan shelf over its mounting location screws and screw the shelf in place. Mount a second shelf below the first, just above the bottom shelf of the cabinet.
Things You Will Need
- Measuring tape
- Sumergirse router
- Lever bar
That’s it. If you like our answer you can express your feelings through comments.